It might start small: you notice that your engine revs slightly without any change in pressure on the gas pedal. Over time, you start to realize that your clutch pedal is engaging and disengaging quickly by itself. Eventually, you notice a major power decrease in your drive wheels. All these things together, over time, add up to what can only be diagnosed as a slipping clutch.
In the realm of semi truck repairs in Duncan, OK, a slipping clutch can be a big one. Anything having to do with your semi’s transmission is going to be daunting, but when a clutch starts to slip or fail, it means your entire powertrain is going to struggle.
Pinpointing clutch issues
So what exactly are your next steps when it comes to clutch repair and how should you address this major concern so that it doesn’t begin to cause stress and strain on the rest of your transmission or powertrain?
The first thing to do is to have a mechanic confirm that you’re indeed looking at a clutch problem and to quantify the scope of that problem. In some cases, you may just need to have the clutch plate replaced to restore function, however in more severe cases where the entire system has suffered, you may require flywheel grinding or replacement of the pressure plate as well. Confirming with a mechanic will let you know what you’re looking at in terms of semi truck repairs in Duncan, OK.
Once you know what you’re looking at, you’ll also know things like cost and timeline, which will help you to fill in these important pieces of the picture. Your mechanic may have recommendations in terms of clutch replacement parts, which should also be discussed.
Finally, and most importantly, you need to make sure you’re working with a mechanic that is well-versed in semi truck repair or, at the very least, a clutch repair specialist.
Adjustment or replacement?
One of the chief reasons to speak with a clutch expert is to discern if a replacement is truly in order for your semi. Semi clutches are designed to be adjusted several times before an actual replacement is needed—if your clutch still has some life in it, an adjustment may be all that’s needed to set things right and restore function to your rig once again!
Clutch adjustments are much simpler to deal with and cost a great deal less to resolve, but the alignment on your clutch must be precise to make sure the adjustment is going to have beneficial effects—an improperly adjusted clutch is going to do a world of hurt to your transmission and leave you with more problems that you started with!
The bottom line is this: clutch issues don’t spell doom for your rig, but they could signal the need for immanent repairs or, at the very least, adjustment. Make an appointment with Heavy Truck & Trailer Parts today if you’re seeing the signs of a slipping clutch and get to the bottom of the issue before it erupts into a costly problem.