For many people, driving a semi truck is a way of life, something that they find passion and joy in. After all, what is better than seeing the open road stretch out ahead and knowing you are in control of a powerful, state-of-the-art piece of machinery?
With that freedom, however, comes a grave responsibility: making sure your truck is well cared for, and that it’s safe for yourself, your fellow drivers and the environment. Here in Oklahoma, the state’s Department of Transportation (DOT) makes sure this is the case by requiring regular inspections for all semi trucks.
If you have an inspection coming up, you might be wondering what steps you can take to ensure that your truck passes with flying colors. With that in mind, here is your guide to passing a DOT inspection, from your local semi truck mechanic in Duncan, OK.
Maintenance is key
Even if you have never driven a semi truck before, you probably already know how important maintenance is for virtually any type of vehicle. Routine tasks like changing the oil, rotating the tires and checking the brakes are all easy and affordable ways to ensure that your vehicle is safe to operate, and that it stays that way for a long time to come.
For semi trucks, maintenance is even more crucial, as poorly maintained semis can inflict a whole lot more damage than your average car. As it turns out, maintenance is also key when it comes to passing your regular DOT inspections. By bringing your semi to a fully certified and experienced semi truck mechanic in Duncan, OK, you will have the chance to address any problems before the actual inspection and make sure that each and every part of your car is in the best possible shape going into the process.
Even if you do not have inspection coming up, routine maintenance is always a good idea—but it becomes even more crucial when you do have a DOT inspection on the horizon.
Use helpful resources
In addition to investing in routine maintenance for your semi truck, it helps to know exactly what to expect from your DOT inspection. Here is a rundown of the different things a certified inspector will usually look at:
If you bring your semi truck in for a pre-inspection tune-up and they miss something from the above list, do not hesitate to bring it up to your mechanic and ask them to check that out as well.
Finding an inspection point
Finally, when the time comes to find an inspection service, make sure they are fully certified by the Oklahoma DOT. It also does not hurt to ask fellow semi drivers for recommendations of their favorite inspection stations.
And if you are in the Duncan area, we hope you will consider trusting Heavy Truck & Trailer Parts with the job. We are proud to be your fully certified DOT inspection station and semi truck mechanic in Duncan, OK.